Android user

1. Make sure Batteries are charged properly for Actofit Smart Scale Pro Max.
2. Install the "Actofit Smart Scale" App on your mobile.
3. Register & Login into the app.
4. Enter your Profile details.
3. Kindly make sure that you have kept your Location and Bluetooth service ON.
4. Provide all required permissions to the app (Bluetooth, Storage, Location, camera)
5. Click on the scan Devices button to connect the smart scale to the mobile phone application
6. Kindly step on the smart scale to enable the Bluetooth of smart-scale and click the scan Device button on the application.
7. Select the Actofit Pro Max device from the device selection list. Clicked on scan now button. Clicked on device mac id e.g. Actofit Pro Max Scale that appears on the scanning screen. (A small smart scale with name Actofit Pro Max Scale with mac id). Then click on connect Button.
8. Now select the user from the users list. After selecting particular user from users tab smartscale will enable the connection. If failed kindly re-select the user again while measuring.
9. If the smart scale is connected successfully to your app then it will show a small Bluetooth icon when you next time stands on it.
10. You have to stand barefoot and keep hand held electrodes in the hand. Make sure your left and right thumb are in the good contact with aluminum electrodes. Stay on the smart scale until the stable weight value appears on the smart scale screen after three times flashing of the screen (You have to stand for approximately 15 sec)
11. On the successful measurement, you will get all 24 body parameter values including segmental analysis in your app.
12. The above procedure is to be done only for the first time. If you have done this procedure successfully then from next time onwards you just have to enable Bluetooth and location service of your phone and stand on the Actofit Smart Scale Pro Max to Measure your body parameter (Only follow point no 10 for every reading)

 

Do not try to pair the scale from Mobile Bluetooth Settings. Follow the Actofit Smart Scale Pro Max Manual for a seamless integration process!

Note: We recommend you to check your Body composition details once every 4 week.
 

 

 

IOS user

1. Install the "Actofit Smart Scale" App on your mobile.
2. Register & Login into the app.
3. Then click on “Connect to Smartscale” Button or you can click on Plus ‘+’ icon. Make sure your Bluetooth is switched on.

4. Select ‘Actofit smartscale Pro  ‘option from device selection process.  
5. Kindly step on the smart scale Pro Max to enable the Bluetooth of smart-scale.
6. Now the Actofit Smart scale icon will be shown on your connected device's screen. Now click on the scale icon in the Scan search screen, you have successfully paired your app with smartscale.

7. Now, You have to stand barefoot and keep hand held electrodes in the hand. Make sure your left and right thumb are in the good contact with aluminum electrodes. Stay on the smart scale until the stable weight value appears on the smart scale screen after three times flashing of the screen (You have to stand for approximately 15 sec)
8. On the successful measurement, you will get all 24 body parameter values including segmental analysis in your app.


 Do not try to pair the scale from Mobile Bluetooth Settings. Follow the Actofit Smart Scale Pro Max Manual for a seamless integration process!

Note: We recommend you to check your Body composition details once every 4 week.