FAQ
1. To connect the band to the phone, kindly install the " Actofit workout tracker " app on the phone. 2. Complete the login procedure. 3. Select...
Fri, 7 Jun, 2019 at 12:42 PM
If the phone is not able to search the band, there can be following possibilities. 1. Band is out of Bluetooth range. 2. Band is connected to other phone....
Fri, 7 Jun, 2019 at 12:46 PM
This occurs only if the Bluetooth of the mobile is not kept ON.
Thu, 28 Feb, 2019 at 5:16 PM
Impulse Band can be used for 5-7 days. Ideally its battery last for 5-7 days. You can again reuse the Impulse Band once it is charged successfully again.
Thu, 28 Feb, 2019 at 5:19 PM
There are different modes in the Impulse band 1. Group Training 2. Personal Training 3. Treadmill 4. Running 5. Cycling 6. Gym
Thu, 28 Feb, 2019 at 5:20 PM
1. Swipe the screen up 2. Click on Training 3. Swipe the screen up or down to see the different modes 4. Long press on any mode so start the session
Thu, 28 Feb, 2019 at 5:21 PM
1. In session Swipe up once 2. Long press the screen 3. Click on stop button 4. Swipe the screen to left, right, up or down
Thu, 28 Feb, 2019 at 5:22 PM
1. Make Sure he Bluetooth is ON, and smart phone Android 6.0 and above & iOS 9.0 and above 2. Make sure that the distance between phone and device ...
Thu, 28 Feb, 2019 at 5:25 PM
1. Caused by the abnormality of Bluetooth service when it reboots on the phone. 2. Reboot mobile phone or restart the Bluetooth service, then it works.
Thu, 28 Feb, 2019 at 5:26 PM
There are few points need to be noticed; 1. Please do not wear the wrist band too loose, otherwise the tracker can’t check the sleeping state. 2. If you w...
Fri, 7 Jun, 2019 at 2:48 PM